0

Oracle E-Business Suite 12.2.4 Now Available

I'm pleased to announce that, the terminal patchset for the 11gR2 Oracle Database Certified with EBS on Windows Server R2. I could not locate *OC4J_l_ _orcl* directory in the installed path but instead I am seeing OC4J_localhost_orcl Could some. IP addresses in the connection descriptions; if a host name was substituted by IP address the delay disappeared for this alias. LinkedinGroup; Oracle Technology (Full List) Balaji Group; Oracle Blogs; Mysupport; Metalink for Firefox (Non-Flash Users) Oracle Corporation; Share the content if you found it is useful (You can share using 300 community websites) click "share" at the end of the post. Starting with Oracle Database 11g Release 2 (), Oracle Database is also Firefox (supports Oracle Enterprise Manager Database Control ) The following patches are required for Oracle Solaris on x (bit) if. Sigmastat 3 5 keygen. I need to patch on oracle, patch is not available for that version anymore.

VCenter Server 5.1 Update 2 Release Notes
1 Oracle Database 11g Release 2 JDBC Driver Downloads 17%
2 2 Oracle WebLogic Server 81%
3 What's New - Oracle Linux Yum Server 22%
4 EPM 11.1.2.3 Installation and configuration Documented 42%
5 VMware vExpert 2020 Application 66%
6 Kofax MarkView Release Notes for Oracle E-Business Suite 3%
7 Oracle Database Express Edition 33%
1

Hack 304121 – debugedit prints: canonicalization unexpectedly

The patchset number is and is available for download from My Oracle Support. Optionally Backing Up the Oracle Database. Point blank turk wall hack 2020 https://sneakers-top.ru/forum/?download=2472. Haydunn pokemon ruby hack this page. Milkshape 3d full crack idm. The non-CDB architecture is deprecated in Oracle Database 12c. ORACLE CLIENT PATCH has not been rated by our users yet.

  • AJAX Interview Questions
  • Oracle Database Preinstallation Requirements
  • ORA-00201: Control file version 11.2.0.3.0 incompatible
  • Oracle E-Business Suite 12.2 Now Available
  • The Latest Oracle E-Business Suite ... - Oracle Blogs
  • Oracle: Enable Oracle Enterprise Manager 11g Database
  • Oracle Software Technical Support Policies
  • Table Not Displayed in Object Browser - APEX 4 ...
  • Rassegefluegel - Prachner Kanik
2

Of the Love of Oldtimers - Dusting Off a Sun Fire V1280

Registration key not able to launch the EM DB console on ... - Oracle Community

Topface hack vip cheat er. A Blog about oracle Databases and Oracle Applications, Middleware and Fusion Technology. The last available file is SAPP_ZIP. PSU (Patch ) Environment- DB OS-AIX Set the Environment for the Database for which you are applying the Patch- es/home/cvhdb $. oraenv ORACLE_SID = [ORDBUSSTLQ03]? Crack software carbrain c168 games. Then set virtual memory to 1 times the size of the RAM. Oracle patch set 11.2.0.3 firefox.

3
  • Readme Information for Oracle Database 12c Release 1 (12.1
  • Installing APEX 4.2 and configuring Embedded PL/SQL
  • DistroWatch.com: Manjaro Linux
  • ANJANI APPS DBA: Oracle EBS Certifications with Oracle
  • Oracle Critical Patch Update Advisory - July 2020
  • Oracle Database Quick Installation Guide for Microsoft
  • Errors during the Installation of Oracle 9i
  • DistroWatch.com: Archman GNU/Linux
  • Reminder: Upgrade Database 11.2.0.3 Before ... - Oracle Blogs
  • Reminder: Database 11.1.0.7 Premier Support ... - Oracle Blogs

How to migrate EM12c R3 OMS and repository to a new host

Oracle Database 11gR1 (version. Asked: February 12, 2020 - 10: 47 am. Oracle has termed it as terminal patchset. Oracle Linux 6 with the Unbreakable Enterprise Kernel (UEK).

4
  • Installtion of product on the client
  • How to Change SSL/TLS Protocols in Oracle Weblogic Server
  • Oracle Critical Patch Update - April 2020
  • Application Express 5.0.1 Patch Set Notes
  • How to Migrate to Oracle Linux and Oracle VM
  • Quest_in_OracleDBA: Oracle Database 11.2.0.4 installation
  • 11GR2 RAC INS-06006 passwordless SSH connectivity not set

Plain Virtualization: Metro Clustering on VMware

If you enable Autoplay, playback will occur without any user interaction with the player; playback data collection and sharing will therefore occur upon page load. Production With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options. Oracle has released a new PSU (July ) for the 11GR2 Database which is described in the MOS Note This Update also fixes some BUGs on Oracle Database Appliance System. You add PDBs based on your business requirements. Facebook hacking software with product key. No cd crack f-22 lightning 3 demo https://sneakers-top.ru/forum/?download=3042. Fifa 07 patch 2020 transfers adobe.

5

Play FusionFall on Lunix [GUIDE]

Play FusionFall on Lunix [GUIDE]
\ - originally posted via* /fusionfall sub-channel via /reddit site. Because the posts were redacted meaning the general public is unable to view I could access the content & forward here to our new sub-channel /fusionfall2
X - https://bit.ly/2Wck45A [via FFU FORUMS]
{official user statements via FFU FORUMS}
https://preview.redd.it/i3o9am66fvn51.png?width=342&format=png&auto=webp&s=6daae800cb7edd56a34235485bd2a084a0705c56
FusionFall Universe Forums »
FusionFall Universe »
Technical Issues / Bug Reports »
[Guide] How play FusionFall on Linux «
Author Topic: [Guide] How play FusionFall on Linux
« previous next »
Pages: [1] 2 3 Go Down
(Read 16682 times)
Wolfizen
Member Posts: 10
Linux Guru
View Profile
wolfizen.net
[Guide] How play FusionFall on Linux
« on: June 08, 2016, 05:47:28 PM »
Running FFR in Lutris
Lutris is an open-source Linux game manager. FusionFall Retro has an entry in their database, you can install the game through their program. I recommend using Lutris to run FusionFall - it streamlines the process of installing the game, and it provides a Steam-like interface for all your Linux games. I maintain a Lutris install script of my own, and I use that to submit improvements to the database script. You can find this installer at: https://lutris.net/games/fusionfall-retro/
My personal script is on my GitHub: https://github.com/Wolfizen/FusionFallLinux
Running FFR under Wine
Wine is a Windows compatibility layer for Linux (wine is not an emulator). The FusionFall client is able to run under this compatibility layer.
u/Stellarspace1234 has developed a step-by-step guide to get the FFR launcher and game installed on Linux. You can find their work here on the forums: https://forums.fusionfalluniverse.com/index.php?topic=15432
I've adapted Stellarspace's work into a simple install script, plus some improvements of my own. You can find this script on my GitHub: https://github.com/Wolfizen/FusionFallLinux
Running FFR in a Virtual Machine
Virtual Machines can run Windows games in Linux where other options do not work. FusionFall is not a demanding game and should run fine even on a low-power computer. I can run on max settings with my integrated Intel chip.
  1. Download your favorite flavor of virtual machine. I prefer OracleBox.
  2. Give the guest machine maximum video memory, and enable 2D/3D acceleration.
  3. Install Windows. I tested with 10, anything 7 or later will work.
  4. Download and install Microsoft Visual C++ Redistributable 2015 x86 AND x64.
  5. Download and install Microsoft .NET Framework 4.7.2.
  6. Run the installer. The launcher and game should start successfully.
  7. If you have mouse movement issues in-game, I recommend disabling Mouse Integration for your VM and/or changing the input device to PS/2 mouse.
« Last Edit: February 28, 2019, 07:36:13 PM by Wolfizen » Logged
« Reply #1 on: June 08, 2016, 05:48:48 PM »user: Wolfizen
I am re-posting this from the old forums. It is just a guide to run FF Legacy and FF Retro on a Linux\-based PC. I feel that it should also be here, since this is the new "official" forum.**
Logged
user: Rodita

Re: [Guide] How play FusionFall on Linux

« Reply #4 on: June 25, 2016, 07:13:29 AM »Quote from: Wolfizen on June 08, 2016, 05:47:28 PM
Guide: How to play FusionFall on Linux
I'm guessing a few of you have a Linux system and either dual-boot a Windows installation or run a VM with Windows on it. Either way, it is certainly not convenient. This guide will show you the general steps to get the Unity Web Player running on your Linux system. Consequently, you will be able to run any unity content, not just fusionfall
Installation
Pipelight is a wrapper for many windows-only plugins such as Silverlight and Unity. This guide will specifically be for Firefox, but Pipelight is able to run in many other browsers. These steps will walk you through installing Pipelight and getting it to work with FFL.
Step 1: Install the Pipelight package
Since installing pipelight is distro-specific, please follow step one of the official guide by picking your system here.
Step 2: Disable default plugins
Normally, no plugins are enabled, however it is possible that silverlight was enabled during the install process. To be sure that all plugins are disabled, please runCode: [Select]pipelight-plugin --disable-allsudo pipelight-plugin --disable-all
Step 3: Update plugins
This step verifies that you have the latest version of each plugin and scripts associated with them. This does not update pipelight itself, just the emulated plugins. Code: [Select]sudo pipelight-plugin --update
[Note] You may have already done this depending on which system you have by following the official guides. This is here to ensure consistency.
Step 4: Enable Unity3D
Now with a clean installation, we need to enable the Unity3D plugin, as that is the platform used by FusionFall. This will be user-specific, so you may need to run this multiple times if you have multiple users on your system. Code: [Select]pipelight-plugin --enable unity3d. If there are any license prompts, accept them by typing y.
Step 5: Test the installation
The plugin should now be correctly installed and functional. Restart your browser, and view the plugin page (type about:plugins in the address bar). You should now see 'Unity Player' listed. If not, try the troubleshooting steps.
Step 6: Change your browser platform
This is somewhat of a workaround to get FFL to load the unity player for us. We will change the platform advertised by Firefox to appear as if we are on a Windows machine. First, type about:config in the address bar. You will see a warning message. Modifying the wrong settings in this area can break your browser, so be careful. Acknowledge the warning, and you will see a long list of options. Right-click anywhere, and select New → String. Type general.platform.override as the preference name, and Win32 as the value. You should now see the new preference listed.[Note] This is probably the most complicated step. It might help you to read a guide with pictures. The official site has one here.
Step 7: Enjoy!
You should now be able to run FusionFall Legacy! If you did not see unity in the plugins list, or the game page is blank, follow the troubleshooting steps below.
Additional Steps for Retro
FusionFall Retro requires the use of an older version of Unity Web Player. Follow these steps after following the main guide and performing any necessary troubleshooting. These steps are not necessary if you intend to play on FusionFall Legacy instead.
Step 1: Download the custom version of Unity
Since the installer cannot (or should not) be ran on a Linux system, I have already extracted the necessary files for you. Download them from here (mega.nz). If you want to get these files yourself, simply run the installer from here and copy the files located at C:\Users\\AppData\LocalLow\Unity\WebPlayer
Step 2: Backup your current installation
If you ever want to play Legacy, or any other unity content that uses newer versions, you will need your old installation. Code: [Select] cd ~/.wine-pipelight/drive_c/Program Files/Unity/mv WebPlayer WebPlayer.bak
Step 3: Copy the new Unity files
The files you downloaded from Step need to be placed in the same location as the old version of Unity. This essentially causes pipelight to load any version of Unity we want, as long as the files are in the same place. Place the downloaded zip file in the ~/.wine-pipelight/drive_c/Program Files/Unity/ directory and run this command: Code: [Select]unzip unity-retro.zip
[Note] If in Step 1, you instead chose to obtain the files manually, place those files in a new directory named WebPlayer
**Step 4: Enjoy!*\*
Now that you have the correct version of Unity installed, you can enjoy playing Retro on your not-so-retro operating system.
Testing your installation
Ideally, you can simply load the FusionFall game page as a test. If FusionFall is down or you want to use a separate testing option, you can find a demo that works for almost every version of Unity here.
Troubleshooting
These steps can fix common issues. Find your issue (if listed) and follow the steps. Once that problem is fixed, it might uncover another problem. While these steps are mostly harmless, you should only follow a section if that problem applies to you.
Unity Player is not appearing in the plugins list
1: Copy this section somewhere, as you will need to close your browser during these steps.
2: Open the about: support page.
3: Click on Open Directory beside Profile Directory.
4: Close Firefox.
5: Open pluginreg.dat with a text editor.
6: Remove all lines below [INVALID] and save the file (Only lines below, not the line itself).
7: Start Firefox. Unity Player should now be listed on the plugins page. If not, continue to Step 8.
8: Close Firefox.
9: Delete the ~/.wine-pipelight directory.
10: Start Firefox.
11: Follow steps 2-7 again.
Some fonts do not render (Commonly the username/password fields)
1: Navigate to your system's font directory (most likely /usshare/fonts/TTF).
2: Copy all files in that directory to ~/.wine-pipelight/drive_c/windows/Fonts/
3: Restart Firefox / Restart system.
4: You may need to install a Microsoft Fonts package. Consult your distribution's wiki for information.
Plugin crashes after displaying the Unity logo and loading bar (only for systems with hybrid graphics)
1a: If you are running your browser using optirun or primusrun, then you will have to run it normally.
1b: If you are running it normally, you need to run your browser on your discrete card using optirun or primusrun.
Final Note
If after following the relevant steps you are still unable to get FFL to work, use the numerous online resources and your favorite search engine to your advantage. As a Linux user, it is valuable to know how to troubleshoot your own system. I may be able to help if this guide is incorrect, but otherwise you are on your own.
**Enjoy!*\*
I hope this guide has helped you to experience FFL on your desired OS!
If you may have noticed, Pipelight can run many other plugins besides Unity. The full, official guide can be found here.
Logged
X - https://bit.ly/2Wck45A [via FFU FORUMS]
{official user statements via FFU FORUMS}
¯\_(ツ)_/¯
\If you wish to learn coding analyzing vast programming languages in general review* X Developer Notice 3 has external resources. If you're a quick learner & proficient with technology you'll understand the concepts & terminologies quickly.

;)

-- ARCHIVE for the GAME & ADDED the LINKS for easy access - http://bit.do/fHZmm + http://bit.do/fGk8s + http://bit.do/fGk8m {FFU Client} + http://bit.do/fGmiW + http://bit.do/fGk8z + http://bit.do/fH3jX + http://bit.do/fGk8C + http://bit.do/fHZmf [via GOOGLE DRIVE]. INCLUDES - #fusionfall data/info files + #fusionfallretro early access + #fusionfalluniverse + #fusionfall:project-revive + other DISCLOSED FUSIONFALL FILES ONLINE [CN]
DEV TEAM [FFU] -
@Bambeptin @Dogon_McBanana @DrawsKem @Funske32 @Kevman95 @KuroArtist @KyraXyreSpace @Lunar_Seastar @MattWavesx @MeModelZenpock @panman_music @przzyfied @RealWilttilt @TechTheNoob @virtanderson @WileyTheKoyote @womayhem #fusionfall #fusionfalllegacy #fusionfalluniverse via TWITTER

GAME CREDITS - https://reddit.com/FusionFall2/comments/hpansf/game_credits_ffu/

submitted by malornwsx to FusionFall2

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
  • Use an OS that was lighter
  • Update the Reddcoin Core software (2.0.0.0 => 2.0.1.2)
  • Make improvements to the configuration.
 
The updates
  • OS: using Lubuntu instead of Ubuntu MATE. Lubuntu uses less resources (130 MB RAM vs. 190 MB RAM on initial boot).  
  • Reddcoin Core: v2.0.1.2-a8767ba-beta instead of v2.0.0.0-92768f9-beta.  
  • Swap: using a swap partiton instead of a swap file. Also adjusting the swap size: from 1 GB to 2 GB, after reading the comments to my previous tutorial.  
  • All data to USB: Blockchain data and the swap are now stored on the USB drive, instead of the SD card.  
  • Private keys: added instructions on how to backup the private keys of your Reddcoin addresses!
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

  • Hardware: Raspberry Pi 3 Model B.  
  • OS: Lubuntu 16.04.2 (Xenial).  
  • Storage space: I am using an 8 GB microSD card for the OS, and a 128 GB USB drive for data. Minimums I would recommend: 8GB SD card and 32 GB USB drive.  
  • Reddcoin Core client version: v2.0.1.2-a8767ba-beta (most recent version at this moment). ↳ Screenshot
 

Steps

 
  • You need software to write the OS to the SD card. I use Etcher. Download Etcher: https://etcher.io/.
    • Run Etcher.  
    • Select image: select the lubuntu-16.04.2-desktop-armhf-raspberry-pi.img.xz file.  
    • Select drive: select your microSD card.  
    • Flash.
 
  • Plug the SD card into your Raspberry Pi and power it up.
    • Lubuntu should boot up.  
    • Set up Lubuntu, connect to the internet (wired or wireless). ↳ As username, I chose "rpi3b". You will see this username throughout this whole tutorial.  
    • Make sure date and time are correct ([Menu] > System Tools > Time and Date). ↳ Click on Unlock to make changes. I personally change Configuration to "Keep synchronized with Internet servers". ↳ Screenshot  
    • Reboot ([Menu] > Logout > Reboot). I am connected to wifi, but have issues getting wifi to work on initial boot. A reboot solves this issue.
 
  • Make sure system is up-to-date, install never versions.
    • Open LXTerminal ([Menu] > System Tools > LXTerminal). ↳ Screenshot  
    • Enter the following in LXTerminal: sudo apt update && sudo apt upgrade ↳ Screenshot  
    • You will be asked if you really want to continue. Enter Y (yes).  
    • Updates are being installed! Wait until it's finished.  
 
  • Install programs that will be used in this tutorial.
    • GParted: to partition the USB drive.
    • Htop: to see the amount of memory (RAM) and swap that is in use.  
    • Enter the following in LXTerminal to install these 2 programs. sudo apt install gparted && sudo apt install htop ↳ Screenshot  
 
  • Create 2 partitions on the USB drive: 1) Swap partition 2) data partition (for the Reddcoin blockchain)   The swap partition is necessary: The Reddcoin wallet can be memory intensive. To prevent any crashes or freezes, add 2 GB of 'virtual' memory by creating a swap partition.  
    • Important: Backup your USB drive if needed. The USB drive will be formatted, so the data on the USB drive will be wiped.
    • Please use the USB drive solely for this purpose, do not combine it with other stuff.
    • Keep your USB drive plugged in, do not (randomly) plug it out.  
    • Plug your USB drive in.  
    • GParted will be used to create the partititons. Start GParted via LXTerminal: sudo gparted ↳ Screenshot  
    • In GParted, switch from your SD card (default) to your USB drive. ↳ ScreenshotScreenshot  
    • You will now see the all the partition on USB drive. Delete every partition (right mouse click). If you can't select Delete, do an Unmount first. ↳ ScreenshotScreenshot  
    • After deleting all partition, you will only see 'unallocated' space on your USB drive. ↳ Screenshot  
    • Create the first partition: the swap partition. Right click on the blank space, select New and enter the following:
      • New size (MiB): 2048
      • File System: linux-swap
      • Click on Add. ↳ Screenshot  
    • Create the second partition: the data (blockchain) partition. Richt click, select New and enter:
      • File system: ext4
      • Label: usb
      • Click on Add. ↳ Screenshot  
    • Apply the changes. Click on the check mark or select Edit > Apply All Operations. ↳ ScreenshotScreenshot  
    • Important: The name of the swap partition is needed later, so please write it down. Mine is /dev/sda1 (first partition on first drive (drive 'a')). ↳ Screenshot  
    • Reboot. After the reboot, the data partition you just created should be visible on your desktop. ↳ Screenshot  
 
  • The swap partition is created, so now we can enable and use it.
    • The swap in use can be monitored with the program Htop. Open Htop ([Menu] > System Tools > Htop) to see the 'Swp' (swap) in use. ↳ Screenshot   By default, swap is not used, so 0K. ↳ Screenshot   You can leave Htop open.  
    • To enable the swap partition, open LXTerminal and enter the following commands: (Assuming /dev/sda1 is your swap partition.)  
    • You've enabled the swap partition. Switch back to Htop and check the 'Swp' (swap) value. It should read '2.0G'. ↳ Screenshot  
 
  • To make sure the swap file is persistent (so it survives a reboot), you have to add a line to the /etc/fstab file.
    • In LXTerminal, enter the following command to open the file in Leafpad (text editor): sudo leafpad /etc/fstab ↳ Screenshot  
    • In Leafpad, add this text in a new line: /dev/sda1 swap swap defaults 0 0 ↳ Screenshot (I've added spaces to vertically align the text.)  
    • Save and close the file.  
    • Reboot your Pi.  
    • To see if the swap partition is in use after a reboot, open Htop ([Menu] > System Tools > htop) and check the 'Swp' (swap) value. It should read '2.0G'. ↳ Screenshot  
 
  • So, the swap partition is enabled and in use, and the data partition is prepared. We now can install the necessary software for the Reddcoin wallet; enter the following commands into LXTerminal:
    • sudo apt-get update && sudo apt-get install git build-essential libqt4-dev libprotobuf-dev protobuf-compiler libtool autotools-dev autoconf libssl-dev libboost-all-dev wget pkg-config ↳ Screenshot  
    • sudo add-apt-repository ppa:bitcoin/bitcoin ↳ Screenshot  
    • sudo apt-get update  
    • sudo apt-get install db4.8 ↳ ScreenshotScreenshot  
    • sudo apt-get install libminiupnpc-dev ↳ Screenshot  
    • sudo apt-get install libqrencode-dev ↳ Screenshot  
    • Reboot your Raspberry Pi.  
 
  • After the reboot, open LXTerminal again. Download, unpack, configure, build and install Berkeley DB.
    • Set the working directory to your USB drive: cd /media/rpi3b/usb (rpi3b is the username I chose; if you have a different username, change it to yours.) ↳ Screenshot  
    • sudo wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz ↳ ScreenshotScreenshot  
    • sudo tar xfvz db-4.8.30.NC.tar.gz ↳ Screenshot  
    • cd db-4.8.30.NC  
    • cd build_unix  
    • sudo ../dist/configure --enable-cxx  
    • sudo make This took about 10 minutes for me.  
    • sudo make install  
 
  • Set BerkeleyDB variables (in LXTerminal):
    • export CPATH="/uslocal/BerkeleyDB.4.8/include" ↳ Screenshot  
    • export LIBRARY_PATH="/uslocal/BerkeleyDB.4.8/lib" ↳ Screenshot  
    • sudo leafpad /etc/ld.so.conf.d/daemon-libs.conf ↳ Screenshot  
    • Add this line in Leadpad: /uslocal/BerkeleyDB.4.8/lib/ ↳ Screenshot  
    • Save and close the file.  
    • Back in LXTerminal: sudo ldconfig ↳ Screenshot  
 
  • Download the source of the Reddcoin wallet and build it.
    • Set the working directory to your USB drive: cd /media/rpi3b/usb (rpi3b is the username I chose; if you have a different username, change it to yours.)  
    • Download Reddcoin Core source files: sudo wget https://github.com/reddcoin-project/reddcoin/archive/arm_support_v2.zip ↳ ScreenshotScreenshot  
    • Unzip the file: sudo unzip arm_support_v2.zip ↳ Screenshot  
    • rename the folder from ''unzip arm_support_v2'' to ''reddcoin'' (easier to use when needed) sudo mv reddcoin-arm_support_v2/ reddcoin/ ↳ Screenshot  
    • cd reddcoin ↳ Screenshot  
    • sudo ./autogen.sh ↳ Screenshot  
    • sudo ./configure --disable-tests --enable-sse2=no ↳ Screenshot  
    • sudo make ↳ ScreenshotScreenshotScreenshot (This will take some time; with me it took just over 1 hour.)  
    • sudo make install ↳ ScreenshotScreenshot  
 
  • Speed up synchronizing with the Reddcoin blockchain by bootstrapping.
    • Set the working directory to your USB drive: cd /media/rpi3b/usb (rpi3b is the username I chose; if you have a different username, change it to yours.)  
    • Download the bootstrap file (1.45 GB): sudo wget https://github.com/reddcoin-project/reddcoin/releases/download/v2.0.1.2/bootstrap.dat.xz ↳ ScreenshotScreenshot  
    • Unpack the file (large file, takes around 15 minutes to unpack): sudo xz -d bootstrap.dat.xz ↳ Screenshot  
    • After a successful unpack, your will find the file bootstrap.dat in your USB root folder. ↳ Screenshot  
 
  • On the first run of the Reddcoin Core client, it will ask for a data directory to store the blockchain and wallet data.
    • Start the Reddcoin Core client: sudo /media/rpi3b/usb/reddcoin/src/qt/reddcoin-qt ↳ Screenshot  
    • The welcome screen will appear and ask you about the data directory. I suggest a new folder on your USB drive, I picked blockchain. The directory will be created with all the necessary files. ↳ Screenshot  
      • Select Use a custom data directory. ↳ Screenshot  
      • Click on the three dots (...) on the right. ↳ Screenshot  
      • Click on Create Folder at the upper right corner. Type and enter in the folder name. (In my case: blockchain.) Click on Open. ↳ ScreenshotScreenshotScreenshot    
    • After selecting the directory, the Reddcoin Core client will start. Wait till it's fully loaded and close it.  
 
  • Move the bootstrap.dat file to your data directory you selected in the previous step. By doing this, Reddcoin Core will use the bootstrap.dat file to import the blockchain, which speeds up syncing. sudo mv bootstrap.dat /media/rpi3b/usb/blockchain/ (Assuming blockchain as data directory.) ↳ Screenshot
 
  • The Reddcoin Core client set up is completed, but you still have to sync fully with the blockchain before you can send, receive and stake.
    • Launch the Reddcoin Core client again: sudo /media/rpi3b/usb/reddcoin/src/qt/reddcoin-qt ↳ ScreenshotScreenshot  
    • Keep the client running until it's fully synchronized. It will use the bootstrap file first, and download the rest of the blockchain to complete the sync. This can take some time (it took 2 days for me). Syncing the blockchain uses a lot of resources, so the software may react slow.  
    • You can see the progress in the debug window (Help > Debug window). ↳ Screenshot  
    • When the synchronization is completed, the red (out of sync) will disappear on the Overview screen! ↳ Screenshot  
 
  • When synchronization is complete, you can start staking your Reddcoins.
    • For staking, your wallet needs to be encrypted: Settings > Encrypt... Do not forget your password!ScreenshotScreenshotScreenshotScreenshotScreenshot  
      • Your wallet will be encrypted, and the Reddcoin Core client will be closed. Launch the Reddcore Client again. sudo /media/usb/reddcoin/src/qt/reddcoin-qt  
    • To start stake, you need to unlock your wallet (by entering your password).
      • Settings > Unlock Wallet...Screenshot  
      • Make sure "For staking only" is checked before clicking OK. ↳ Screenshot  
    • You can only stake with Reddcoins that have matured: coins have to be at least 8 hours in your wallet to mature.  
    • The grey arrow at the bottom should be green when staking. Hover over that icon to see the progress of staking. ↳ Screenshot  
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
  • [01:11] Reddcoin Core started (sudo password entered).
  • [01:13] Message shown on screen: Loading block index...
  • [10:14] Message shown on screen: Verifying blocks...
  • [10:18] Message shown on screen: Loading wallet...
  • [12:49] Message shown on screen: Done loading
  • [13:13] Reddcoin Core ready to use.
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
  • Method 1: Backup your wallet.dat. Open Reddcoin Core. Use the menu to backup: File > Backup Wallet... ↳ Screenshot
 
  • Method 2: Backup your private keys. In case you lose your wallet.dat backup, you still can import your private keys later when needed.  
    • To extract your private keys:
      • If you have a passphrase on your wallet, unlock your wallet first. Settings -> Unlock Wallet... (make sure 'For staking only' is not checked) ↳ ScreenshotScreenshot  
      • Extract your private keys. Debug window -> Console -> dumpprivkey Screenshot  
      • You can write down your private key or copy and save it in a document. Make sure you save it somewhere only you can access it.    
    • To import later: Debug window -> Console -> importprivkey [label] [label] is optional. ↳ Screenshot (without a label) ↳ Screenshot (with a label)
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
  • Right Click on your Desktop and select Create New -> Empty File. ↳ Screenshot  
  • Enter a file name, make sure it ends with .sh, and click on OK. I've chosen for Reddcoin.sh. ↳ Screenshot   The file will be created on your Desktop. ↳ Screenshot  
  • Add the command to start Reddcoin to the file.
    • Right click on the file, select Leafpad (to open the file in a text editor). ↳ Screenshot  
    • Add the following to the file and save the file: sudo /media/rpi3b/usb/reddcoin/src/qt/reddcoin-qt ↳ Screenshot  
  • To be able to execute the shell script (.sh), it has to have 'execute permissions'.
    • Right click on the file, and select Properties. ↳ Screenshot  
    • Click on the Permissions tab.  
    • For Execute, select Anyone, and click on OK. ↳ Screenshot  
  • To start Reddcoin Core, double click on the file. A new window will pop-up, asking you what you want. Execute in Terminal is what we want, so you can click on enter. ↳ Screenshot   Reddcoin Core will now start. Do not close the Terminal window, you can minimize it if needed.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
  • Activate 'Minimize on close'. Settings -> Options... -> Window (tab) -> Minimize on close. ↳ Screenshot   Reddcoin will still run when you click on the X button.   To close/exit Reddcoin, right click on the Reddcoin icon in the system tray (bottom right corner). ↳ Screenshot
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
  • On your Raspberry Pi:
    • Download VNC Connect from the RealVNC website: https://www.realvnc.com/en/connect/download/vnc/raspberrypi/.  
    • After your download is finished, open the file and click Install Package. ↳ Screenshot  
    • To run the VNC Connect once:
      • Open [Menu] > Run, and enter: vncserver-x11 ↳ Screenshot  
    • To auto run on startup:
      • Open Default applications for LXSession ([Menu] > Preferences > Default applications for LXSession). ↳ Screenshot  
      • In LXSessions configuration, select Autostart in the menu left.  
      • Under Manual autostarted applications, enter vncserver-x11 and click on + Add. ↳ ScreenshotScreenshot  
      • Reboot your Raspberry Pi and check if VNC Connect is started automatically after the reboot.  
    • When VNC Connect is running, you'll see a VNC icon on the right bottom corner. Double click the icon to open VNC Connect and to see the IP address you need to enter to connect to your Raspberry Pi. ↳ Screenshot
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
  • In LXTerminal, enter: sudo apt install chromium-browser ↳ Screenshot  
  • You can run Chromium via [Menu] > Internet -> Chromium Web Browser ↳ Screenshot
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
  • Open LXTerminal and enter this command to update: sudo apt update && sudo apt upgrade ↳ Screenshot
     

Credits:

  • cryptoBUZE on reddit.com; for getting the official arm_support_v2.zip to work.
  • worstkaas on reddit.com; for his suggestion of using 2 GB instead of 1 GB for the swap space.
   
Credits in previous tutorial:
  • My main source: damsal01 on reddcointalk.org. His RDD address for donation: Rqd8xDv6oV9BYFaVrLdkWcR5JU6sPPZTKs.
  • hieplenet on reddit.com. His RDD address for donation: RaF3TeWqgTzAdnaZQffnsxS74dag13zsAY.
  • joroob on Github.com. He made some adjustments to the reddcoin wallet source code so it will compile on ARM cpus. His RDD address for donation: Rb8754QZvpbw6DjrMV1qX9SnHzYnSyXRMC.
submitted by Yavuz_Selim to reddCoin